Home Gallery Forum Database Who's Where Cape George Cutters
Login Register

Re: New engine, drive and prop for CG31
Posted by: Greg Miller (---.hsd1.or.comcast.net)
Date: February 22, 2010 12:23PM

Hi Scott-

Thanks for the offer. I did rebuild the engine (2HSP) in Turkey 7 years ago, which is why she is running well. There are a number of lesser things to be done to bring her up to snuff but fundamentally she is in good shape. The only real problems at the moment are that a new alternator and new fuel pump are needed. But ultimately the engine is simply too small, not to mention noisy. Although the grease going to the hub seems to return up the stern tube rather than end up in the water, I'm not sure I want to have that discussion with the Coast Guard. I could drag this out a few years but if I intend to replace her then the sooner done the more I get to enjoy it. Money spent repairing this engine would, for me, be better spent on a new one.

Perhaps between the two of us we could sell these engines to someone who wants to put one in a classic. I certainly don't want much money for it. I also have a spare set of 18" propeller blades.

Thanks again,

Greg




Subject Views Written By Posted
  New engine, drive and prop for CG31 188 Greg Miller 02/20/2010 02:18PM
  Re: New engine, drive and prop for CG31 126 Scott Brown 02/28/2010 11:50AM
  Re: New engine, drive and prop for CG31 166 Scott Sander 02/21/2010 09:01PM
  Re: New engine, drive and prop for CG31 127 Greg Miller 02/22/2010 12:23PM
  Re: New engine, drive and prop for CG31 130 Scott Sander 02/22/2010 08:29PM


Sorry, only registered users may post in this forum.
Home  |  Gallery  |  Forum  |  Database  |  Cape George Cutters
This website designed, hosted and maintained by Coledata, Inc.